Page 224 - Saber® Installation & Startup
P. 224
INSTALLATION & STARTUP
Chapter 19 Photo Eyes
General
Modulation Frequency
The standard configuration for Photo Eyes is to utilize Frequency A (shown in
image to right), However if a system installation has the possibility for “Photo Eye
Cross-Talk”, the affected Photo Eye set may be configured to utilize Frequency
B. In this case both Emitter and Receiver must be wired for Frequency B.
View from Bay Entrance
Receiver
Emitter
33”
If Wall Mounted configuration is used, mount the Photo Eyes at the heights indicated
16”
Floor
View from Overhead
Emitter
Mount the Photo Eyes with a minimum of 6” off-set
Receiver 6”
Wiring
Wiring for the Vector QS30
Emitter
Brown #340 24VDC
Blue # 338 0VDC
Gray # 340 24VDC
White No Connection
Receiver
Brown #340 24VDC
Blue # 338 0VDC
Gray # 340 24VDC
White Saber® Input X4, X16 & X17
Black No Connection
19-2 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL290
