Page 31 - FreeStyler® E-1063 Programming and Operation Manual
P. 31
E-1063 PROGRAMMING AND OPERATION
Chapter 4 Operator Interface/Programming
Setup
Setup / Application Setup
E-1063 Screen Key
• Columns FILL, DWELL and
PURGE are measured in
seconds
• Values may be changes in
increments of tenths of a second
Fill Time: Delays Carriage motion while application is filling. Typically time is long enough to pressurize nozzles
and ensure chemical is dispensing out of the nozzles.
Dwell Time: Delays starting the next pass to allow chemical to soak on the vehicle longer. Typically not necessary
for the type of chemicals used in a friction wash.
Purge Time: Delays starting the next pass while turning on Purge Air and keeping Output on specified by
application. Typically “End Cycle Purge” will be used instead of this feature when purging is necessary.
Setup / Advanced Configuration
E-1063 ONLY: See Chapter 6.
1MANUL224 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 4-3