Page 25 - Full Side Washer Signature® Series

FULL SIDE WASHER Signature ® Series

Installation

Utilities
Electrical
If the wheels are rotating in the wrong direction, reverse two leads to the electric motors on the
overload located in the Control Panel.
1) Depending on the location of your equipment room, drill a 1/2” hole in the junction box and feed 3
phase power to the component. This will require a field supplied cord grip.

Wheel Rotation
If the wheels are rotating in the wrong direction, reverse the leads to the electric motors. .
Rotation Direction:

• Driver side: clockwise
• Passenger side: counter clockwise

It is recommended that licensed technicians are contracted to perform all utility installations.
It is imperative that no foreign materials are in the supply lines before final connections are
made. To be sure of this, the lines should be blown out prior to final hookup.
All utilities MUST be installed in accordance with all local and national codes

Confirming Wheel Rotation
Note: Be sure to match the wheel rotation shown below. If the rotation is opposite as show
below, reverse two leads to the electric motors on the overload located in the Control
Panel.

Direction of
Travel

1MANUL856 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 21