Page 23 - Full Side Washer Signature® Series

FULL SIDE WASHER Signature ® Series

Installation

Attaching the Booms
8) Locate the following parts and secure the cylinder and the shock on both booms to their mounts as
shown below.
Shock Fasteners
5/8-11 x 3” HHCS (2 per side)
5/8-11” Lock Nut (2 per side)

9) Locate the following parts and secure the cylinder and the shock on both booms to their mounts as
shown below.
Cylinder Fasteners (2 each per side)
5/16-11 x 1-1/4” Shoulder Bolt
5/16” Plastic Washer
5/16” Flat Washer
1/4” Flat Washer
1/4-20 Lock Nut
Arm
Clevis
Weldment

Mounting
Side
Plate

Before After
If you wish to invert the shock and cylinder, you will need to switch both mounting
Side Plates and both Arm Clevis weldments between the driver side and the
passenger side.

1MANUL856 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 19