Page 17 - Rain Arch (all styles)

RAIN ARCH MANUAL

Installation

Double Manifold for UNIARCH

2) Feed the four supplied U-Bolts around the pipes and slide the Clamp Spacers into place as
shown below. Secure the UNIARCH Weldments into place using the supplied 3/8” lock nuts
and 3/8” flat washers. Be sure the weldment is pointing towards the exit side of the
UNIARCH. Once in place square and level the arms and tighten.

3) Secure the Rain Arch Manifolds to the UNIARCH Weldments using the supplied 3/8-16 x 1”
fasteners as shown below.

4) Connect the water feed to the appropriate ends of the Rain Arch Manifolds.
Manifolds can be fed from either side. They should be fed from the Equipment Room side.

1MANUL650 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 15