Page 12 - Gyro Wrap™ Signature ® Series

GYRO WRAP™ Signature ® Series

Introduction

Before You Get Started

Tools needed for installation:

Forklift (with side shift if available) C-Clamps
Hammer drill with 5/8” bit Tin snips
Tape measure (25 foot or greater) Safety glasses
Miscellaneous hand tools Work gloves

Level 50 foot extension cord
Ladder
Equipment included: Qty

Head Beam Frame Assembly 1
Driver Side Arm Assembly 1
Passenger Side Arm Assembly 1
Leg Assemblies 2

Large Diameter Hub Assemblies: 28-1/4” long 2
Small Diameter Hub Assemblies: 42-1/4” long 2
Steel hub Shafts 2
Spherical Bearing Assemblies 2
Motor-Gearbox Assemblies 2

Lower Hub Neo-Tex Clips 1 box
Upper Hub Neo-Tex Clips 1 box
Filler Strip Kit 1
Neo-Tex Cleaning Material 8 boxes
Accessory box 1

Note: Uncrate and inspect shipment for damage, and to verify that all pieces are there. If there is
any damaged equipment, file a claim with the trucking company immediately. Receiving
party is responsible for filing claim with trucking company. Notify your local distributor or
Belanger, Inc. immediately If shipment is determined damaged or incomplete.

®
Belanger, Inc 1995
This manual and the accompanying equipment are protected by United States and International copyright and patent laws. You
may make one copy of this manual. Do not make additional copies of this manual or electronically transmit it in any form
whatsoever, in whole or in part, without the prior written permission of Belanger, Inc.
®

8 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL248