Page 15 - Gyro Wrap™ Signature ® Series
P. 15
GYRO WRAP™ Signature ® Series
Electric Drive Considerations
Wash Module
Before moving on to the next steps, understand that it is very important that the motor assemblies at
the end of the booms are correctly oriented. Although they are pre-assembled at the factory, inspect
and confirm placement and orientation. The following section will assist you in assuring that this is
done.
The following components MUST be confirmed for positioning and orientation:
• Spin Stops
• Gearboxes
• Motors
• Motor Junction Boxes
IF ANY OF THE ITEMS LISTED ABOVE ARE INSTALLED INCORRECTLY, SERIOUS
DAMAGE CAN OCCUR TO THE MACHINE AND THE POTENTIAL FOR SERIOUS
INJURY IS PRESENT. CAREFULLY CHECK ALL LISTED COMPONENTS!
Motor Assembly Component Orientation
Parts Identification
Motor Junction Box and Electrical Feed
Motor/Gearbox
Gyro Head Mounting Plate
Spin Stop
Sticker located here
indicates Driver Side or
Passenger Side
Note: Above image shows driver side motor and mounting assembly.
1MANUL248 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 11