Page 18 - Gyro Wrap™ Signature ® Series

GYRO WRAP™ Signature ® Series

Installation

Frame Assembly
5) Position the driver side leg so that it is 48-3/4” from the outside of the base plate to the inside edge of
the inside guide rail as shown below.

48-3/4”

This dimension is taken from the
outside edge of the Base Plate to the
inside edge of the inside Conveyor

6) Secure the leg to the floor making sure it is level in all directions before fully tightening the lag bolts.
7) Position the passenger side leg assembly so that it is 151-1/2” from outside to outside of each leg base
plate as shown below.

151-1/2”

8) Verify that the leg is level in all directions and then lag it to the floor.

14 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL248