Page 22 - Gyro Wrap™ Signature ® Series

GYRO WRAP™ Signature ® Series

Installation

Attaching the Spherical Bearing Assembly
There are two different Spherical Bearing Assemblies available, depending on which gearbox
assembly you have selected. Use the image below to distinguish between the two assemblies.
60Hz Assembly 50Hz Assembly

1) Remove the Spherical Bearing Assemblies from the skid. Both are identical and can be used on either
driver side or passenger side.
2) Remove one of the two Spin Stops from each Arm Assembly as shown below.

3) Insert a Spherical Bearing Assembly onto each arm as shown below. The grease fittings on the
bearings should face outward and towards the exit of the bay. Once in place, replace the removed Spin
Stops. Image below shows the passenger side.
Grease Fitting
on this side

Step 1 Step 2 Step 3

18 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL248