Page 24 - Gyro Wrap™ Signature ® Series
P. 24
GYRO WRAP™ Signature ® Series
Installation
Inserting the Shaft
4) To make maintenance easier later, once the locking collar is in place align the set screws of each
bearing so that they are in line with the fasteners on the locking collar and then tighten all four of the set
screws as shown below.
20 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL248