Page 25 - Gyro Wrap™ Signature ® Series
P. 25
GYRO WRAP™ Signature ® Series
Installation
Mounting the Motor/Gearbox Assembly
There are two different Motor/Gearbox Assemblies available, depending on which voltage/hertz
configuration you have selected. Refer to the image below to determine the difference between “Style
#1 (60Hz system)” or “Style #2 (50Hz system)”.
60Hz Assembly 50Hz Assembly
Style #1 ships with a plastic cover set for each Motor/Gearbox Assembly as shown below.
Style #1 (60Hz Systems) Mounting Instructions
1) Locate the following parts from the skid.
2) Place the motor/gearbox assembly inside of the bottom cover. Using the provided hardware, mount
the cover to the motor/gearbox assembly as shown below.
3) Locate one of the steel keyways, two of the 9/16” flat washers, and two of the pin retainers.
1MANUL248 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 21