Page 21 - Gyro Wrap™ Signature ® Series

GYRO WRAP™ Signature ® Series

Installation

Attaching the Arms and Cylinders
9) Attach the pivot end of the cylinders to the bearing block weldment that is secured to the Head Beam
Assembly and the rod end of the cylinders to the clevis that is secured to the Arm Assembly as shown
below.

10) Tighten all of the flow control valves so that the arms will not swing freely when installing the shaft,
hubs, and gearbox assemblies.

Flow Control

1MANUL248 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 17