Page 19 - Gyro Wrap™ Signature ® Series

GYRO WRAP™ Signature ® Series

Installation

Frame Assembly

Attaching the Arms and Cylinders
Determine the driver side Arm Assembly from the passenger side Arm Assembly. The driver side
Arm Assembly is the SHORTER of the two.
1) Remove the four bearings from the head beam assembly as shown below. Note that the grease fittings
face towards the entrance of the tunnel for easy access.

Grease Fittings face
Remove the 4 Bearings entrance (typical)

2) Remove the driver side Arm Assembly and the passenger side Arm Assembly from the skid.

Passenger Side
Arm

Driver Side
Arm

3) Apply anti-seize to the inside of each bearing and place a bearing onto the top and bottom of each pivot
shaft welded to the arms as shown below.
Passenger Side
Arm
Driver Side
Arm

1MANUL248 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 15