Page 29 - Gyro Wrap™ Signature ® Series

GYRO WRAP™ Signature ® Series

Installation

Installing Side Wheel Hubs
The aluminum hub configuration requires the installation of the lower hub first followed by the
installation of the upper hub. Once the two hubs are installed, you may then install the Wash Clips
and Neo-Tex.

Lower Hub Installation Overview
The following is an overview of the naming and placement typical to Hubs.

Spider assembly flush to top of hub
Open end of “C” Channel

36”

Spider (typical)

Skin (typical)

Floor

Lower Hub Installation

1) Locate the 12” diameter x 28-1/4” tall Lower Hub Assembly and remove the Skins that will reveal
and allow access to the inner fasteners on the Spiders as shown below.

Lower Spider is installed
into the bottom holes.

1MANUL248 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 25