Page 34 - Gyro Wrap™ Signature ® Series

GYRO WRAP™ Signature ® Series
Installation

Installing Cleaning Material

Lower Hub Fill (Neo-Tex and Nylon Brush fill)
1) Locate 24 of the 33” x 8” Neo-Tex® pieces and forty-four 8” Wash Clips.
2) Place the Wash Clips in the center of the pack as shown below. Fold the Neo-Tex® pieces in half
and slide the Wash Clips “C” Channels.

Wash Insert Wash Fold Neo-Tex® in
Clip Clips into half to slide into
Neo-Tex® Neo-Tex®
holes “C” Channels

3) Fill every other “C” Channel slot as shown below. Make sure the Packs are pushed all the way to
the bottom of the hub.
4) Fill all of the opposing slots with 8” Wash Clips as shown below.

Hub Overhead View The “fastener
locations” acts as
a Wash Clip

24 (33” x 8”) Pieces of
Neo-Tex® Folded in half
24 Wash Clips

6) Locate 44 of the Nylon Brush packs and fill every slot in the second row as shown below. The
Nylon Brush Packs will load by sliding the “Welt” in the “C” Channel.

44 Nylon Brush
Packs

7) Using 24 more of the 33” x 8” Neo-Tex® pieces and 8” Wash Clips. Fill every other slot in the third
row as shown below.

24 (33” x 8”) Pieces of
Neo-Tex® Folded in half
24 Wash Clips

30 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL248