Page 35 - Gyro Wrap™ Signature ® Series

GYRO WRAP™ Signature ® Series

Installation

Installing Cleaning Material

Upper Hub: Neo-Tex®
Note: The cleaning material for the upper hub comes in two thicknesses. 1/8” thick and 1/4”
thick. Be sure to install the correct thickness in the correct location.
1) Locate 12 of the 41” x 8” x 1/8” thick Neo-Tex® pieces and twelve 8” Wash Clips.
2) Place the Wash Clips it in the center of the pack as shown below. Fold the Neo-Tex® pieces in half
and slide the Wash Clips “C” Channels.

Wash Insert Wash Fold Neo-Tex® in
Clip Clips into half to slide into
Neo-Tex® Neo-Tex®
holes “C” Channels

3) Fill every third “C” Channel slot as shown below (12 pieces in all). Make sure the Packs are pushed
all the way to the bottom of the hub.

Hub Overhead View Fill every third slot

12 (41” x 8”) Pieces of
Neo-Tex® Folded in half
12 Wash Clips

4) Locate 24 of the 25” x 8” x 1/8” thick Neo-Tex® pieces and twelve 8” Wash Clips.
5) Place the Wash Clips ends through the holes if both packs as shown below.

2 pieces of 25” x 8” x x1/8”
thick Neo-Tex® per slot

6) Fill every third “C” Channel slot as shown below (12 pieces in all). Make sure the Packs are pushed
down as far as possible. Be sure the flaps are in the direction as shown below.

Direction of
Travel

1MANUL248 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 31