Page 36 - Saber® E-1063 Programming and Operation Manual
P. 36

1063 PROGRAMMING AND OPERATION

            Chapter 3 Operator Interface/Programming


            Setup

               SETUP / MISC

                Setup / Misc / More
                          EMPTY BAY FLUSH: Toggles between DISABLED and ENABLED. When enabled, the system will
                          run one Thermo Cycle to flush the chemicals out of the Low Pressure System. The single Thermo
                          Cycle will occur after the machine has been “Not in Use” for 15. The Thermo Cycle P1 Output must be
                          selected if this feature is enabled.
                          EMPTY BAY PURGE TIME: This is the amount of time measured in seconds that the machine will use
                          Pulse air to flush the manifolds when the system is “Not in Use”.



























































             3-14              Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681                 1MANUL294
   31   32   33   34   35   36   37   38   39   40   41