Page 21 - Wave Across™

WAVE ACROSS

Installation

Cloth

4) Remove the retainer pin from the upper drive arm at the Pitman arm end and separate the upper
drive arm from the Pitman arm so that the rack hangs vertically.
5) Remove the three retainer pins from the lower drive arm and remove the arm.
6) Remove 1-1/8” outside rack connector bolt.
Entrance View

Retainer pin 1-1/8” bolt,
(typical) (remove for cloth installation, typical)

Upper drive arm

Pitman
arm

Lower drive arm
Drive rack Center Passenger side
follower rack follower rack

1MANUL850 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 17