Page 49 - QuickFire® Wrap Around Mix & Match

QUICKFIRE® WRAP AROUND

Installation

Utility Connections for Side Wheels: Hydraulic

Hydraulic Connections and Wheel Rotation

1) From the hydraulic supply manifold, run hydraulic hoses to the hydraulic fittings on the
distribution block located on the QuickFire® Wrap Booms (two on each side).
2) Be sure to match the correct hose to the correct fitting allowing the right wheel rotation.
See diagram below.

Return

Feed

Feed

Return

Note: It is imperative that no foreign materials are in the supply lines before final connections
are made. To be sure of this, the lines should be blown out prior to final hookup.
Confirming Wheel Rotation

Note: Be sure to match the wheel rotation shown above. If the rotation is opposite as show
below, reverse the hydraulic feed lines to the motor.

1MANUL825 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 45