Page 49 - Top Wheel Mix & Match

TOP WHEEL Mix and Match

Maintenance

Routine Procedures

Daily
· Start with a “Test Wash” to insure proper operation of all equipment.
· Check overall performance for any abnormalities.
· Inspect for clogged nozzles. This can best be done while running the “Test Wash”. Nozzles
can be cleaned by removing the nozzle bodies and tapping or inserting a thin wire into the
nozzle opening.
· Make sure cleaning material is not tangled.
· Check for water and/or chemical leaks after equipment is turned off.

Weekly
· Check weights on the wheel to confirm the desired balance. Adjust as necessary.
· Go through the Hub Assembly and make sure that all fasteners that hold the Hub Adaptors,
are in place and tight.
· Hose down the component and surrounding area. This will remove the majority of the dirt
and other debris that builds up during a week.

Monthly
· Wash component down with a good degrimer such as laundry detergent and hot water.
· Check wash material for wear. Replace if necessary.

1MANUL749 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 45