Page 46 - Top Wheel Mix & Match
P. 46
TOP WHEEL Mix and Match
Installation
Utility Connections
Hydraulic Drive Motor Feed
1) Route hydraulic feeds from the motor to the distribution block as shown below. They are then
to be fed to the Hydraulic Power Unit. See the arrows in the image below for proper motor
and wheel rotation.
Tie-wrap cable
and hose
together
Water
Feed
Distribution Block
Hydraulic
Feeds
Feed
Return
Image above shown with stauff clamps in place
2) Locate the green plastic stauff clamps and secure them to the side of the driver side arm,
stacked two high as shown below using 1/4-20 x 2-3/4” socket head fasteners. The mounting
plates are designed to accommodate both electric and hydraulic drive. For hydraulic drive be
sure to insert the socket head fasteners into the second and bottom holes as shown below.
Use these holes for electric drive
Clamp Mounts
42 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL749
