Page 41 - Top Wheel Mix & Match
P. 41
TOP WHEEL Mix and Match
Installation
Counter Weights and Covers
7) Insert the 3 black plastic clips into the holes to secure the 2-piece weight cover.
Plastic Clip (typical)
Front View
8) Finally drill a 1/4” hole from the bottom of the cover at 1-1/2” inward from the edge as shown
below. This will allow water to drain out of the cover.
Front View Bottom View
1-1/2”
Drill Here
9) In a situation where there is an arm that requires no Counter Weights, place the Rear Cover
on the back of the arm and tighten down with the provided 1/2-13 x 1” bolts and the flat
washers.
1MANUL749 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 37
