Page 40 - Top Wheel Mix & Match
P. 40
TOP WHEEL Mix and Match
Installation
Counter Weight Installation
Counter Weight Configuration
3) Once the required weight configuration has been determined place the Rear Cover on the
back of the arm as shown below, making sure all holes are lined up and place all required
weight(s) onto the arm keeping all holes lined up.
Note: You may need a screwdriver to help position holes and keep them lined up.
Weights (typical)
Rear Cover
Front Cover
4) Tightly secure all weights in place using the correct 1/2-13 bolts, flat washers, and lock
washers.
5) Once the weights have been secured into position, place the Front Cover over the weight(s).
6) Drill one 1/4” hole thru the top of the Front and Rear Covers at 5/8” from the edge as shown
below. Drill two more 1/4” holes 120 degrees in each direction from the top hole.
5/8”
Overhead View
36 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL749
