Page 38 - Top Wheel Mix & Match
P. 38
TOP WHEEL Mix and Match
Installation
Auto Retract Option Installation (if applicable)
Secure the Retract Cylinder into place on the passenger side arm and leg as shown below using 1/4-
20 shoulder bolts with 1/4-20 Nylock nuts and washers.
Secure
cylinder here
using the
supplied white
plastic
washers on
both sides
Secure cylinder here using the
supplied 5/16” and 1/4” flat washers
Air Panel Installation and Photo-Eye Utility Connection (if applicable)
1) Locate the Air panel and secure it to the wall, preferably in the equipment room.
2) Run 3/8” poly-flow airline from the regulator of the air panel to the fitting on the Retract
Cylinder as shown below.
34 Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL749
