Page 37 - Kondor® KL 2 - E-1063 Programming and Operation Manual

®
KL2: 1063 PROGRAMMING AND OPERATION

Chapter 4 Operator Interface/Advanced Configuration

Setup / Advanced Configuration

Advanced Configuration / Application Configuration

NAMED 1 - 8
NAMED ON or OFF ON ON OFF WP
YES / NO FS / FE 000 FS / FE 000 FS / FE 000 YES / NO
Name of OUTPUT. Toggles between Toggles between FS and FE. Toggles between Toggles between
Typically Outputs YES and NO. FS stands for “From Start”. FE stands for FS and FE. YES and NO.
are renamed to If an Output is set “From End”. FS stands for If the Output is set
match the to YES, it will The three zeros are the “Measured in “From Start”. FE to YES, it will turn
application. function with that Inches”. stands for “From off during B/F
application. End”. (Butterfly) in
Each NAMED 1 – 8 has two ON motion to flush
positions. The three zeros
are the “Measured pump.
in Inches”.
Each NAMED 1 –
8 has one OFF
position.
All of the Outputs
turn OFF at the
end of the
application.
MISCELLANEOUS 1 - 7

MISC NAMED ON or OFF ON OFF PFFA WP
YES / NO FS / FE 000 FS / FE 000 YES / NO YES / NO
Name of OUTPUT. Toggles between Toggles between Toggles between Toggles between Toggles between
Typically YES and NO. FS and FE. FS and FE. YES and NO. YES and NO.
Miscellaneous If a Miscellaneous FS stands for FS stands for PFFA stands for If the
Outputs are Output is set to “From Start”. FE “From Start”. FE “Position From Miscellaneous
renamed to match YES, it will function stands for “From stands for “From Front Always”. Output is set to
the application. with that End”. End”. YES, it will turn off
application. The three zeros The three zeros during B/F
are the “Measured are the “Measured (Butterfly) in
in Inches”. in Inches”. motion to flush
pump.
Each MISC 1 – 7 Each MISC 1 - 7
has one ON has one OFF
position. position.

1MANUL128 Belanger, Inc.® * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 4-3