Page 22 - Wurth Total Catalogue

SHEET METAL DRILL HSS

Stepless drilling and widening of holes.

• CBN (cubical boron nitride) deep ground.
• Universally suitable. within the diameter range
3 - 50 mm.
• Suitable for drilling of very thin sheet metal.
• No countersinking or pre-drilling.
• Speed table enclosed.
• Burr-free drilling without deforming the sheet
metal.
• Excellent heat conductivity for improved tool life
due to radial and axial relief grinding.
• Shank 3 phase ground.
• Extended service life and improved cutting perfor-
mance by using Wurth Cutting Oil.
• With laser scale, therefore easy indication of
required drill hole diameter.
Size Drill Diameter Total Length Shank Art. No. Pack Qty.
mm Diameter mm Diameter mm
1 3 - 14 53 6 0694 024 14
2 5 - 20 61 8 0694 024 20 1
3 16 - 30.5 73 9 0694 024 30

SHEET METAL DRILL HSS SET

Contents Art. No. Pack
Qty.
One drill each, of size
1, 2 and 3, diameter 0694 024 01 1
range 3 - 30.5mm.

Speed table for Sheet Metal Drills
Material Non-ferrous Stainless Steel Sheets, Plastic Duroplasts, Steel Sheets, Soft,
Metals Nirosta A2 Thermoplasts i.e. St 14 - St. 37
Sheet Thickness 0.1 - 6.0 mm 0.1 - 2.0 mm up to 10.0 mm 0.1 - 4.0 mm
n = r.p.m.
n = r.p.m.
n = r.p.m.
Size
Diameter mm
n = r.p.m.
AUS. pub. 02/17 © 1 3 - 14.0 2000 -1500 600 - 400 3000 - 2000 800 - 500
5 - 20.0
2000 - 500
600 - 300
2
400 - 200
1500 - 800
1500 - 1000
400 - 200
200 - 100
16 - 30.5
1000 - 500
3
02 0661