Page 24 - Wurth Total Catalogue

BRICK & TILE DRILL BITS

Special carbide drill bit with cylindrical shaft for dry drilling
of high-fired bricks and tiles.

Applications
Hardest ceramic, tiles, fine earthware, bricks and high-fired clay up to
scratch hardness 9.

Product Range
Drill Dia. Total Length Working Length Pack
in mm in mm in mm Art No. Qty.
4.0 75 40 0641 000 400 Ceramic, Brick, high-fired clay
5.0 85 50 0641 000 500 fine earthware
6.0 100 60 0641 000 600 5/10
8.0 120 80 0641 000 800 Advantages
10.0 0641 001 000 2/5 • Suitable for both rotary and percussion drills.
12.0 150 100 0641 001 200 • Exceptionally good in porcelain tiles.
• Diamond-sharpened tungsten-titanium tip.
• Very long service life, even in especially dense materials.
• Low-current, high-temperature soldering process (1,120°C)
• Even the most extreme loads will not loosen the carbide plate.
• Cylindrical shaft allows for faster clamping and reduces slipping in the
drill chuck.

Brick and Tile Drill Bit Kit, 7 pcs.

Contents:
One drill bit of each dia. 4 x 75/40, 5 x 85/50, 8 x 120/80, 10 x
120/100, 12 x 150/100 and two drill bits of dia. 6 x 100/60

Description Art No. Pack Qty.
Brick and Tile Drill Bit Set - 7pcs 0641 000 001 1

Notes on use
• Ensure high contact pressure.
• Cool-down time: approx. 20 sec./hole.
AUS. pub. 11/12 © • Water can be used to cool surface while drilling. Non-impact
• Recommended speed: approx. 600–1,500 r.p.m.
• Caution: Only insert drill bit while moving!

02 0673