Page 1405 - Foton Workshop Manual - Auman EST-M

Body - Seat BW - 167

Change IN

1. Remove the driver seat assembly
DI
a. Remove the mounting bolts in front of the driver seat.

EG

TR

AX
b. Adjust the driver seat assembly to the foremost position.
c. Remove the mounting nuts to connect the rear end of the FR
driver seat assembly and the floor.

d. Fold the driver seat and remove the driver seat assembly
ST
from the cab.

Warning
BR
The driver seat can not be moved after it is removed;

otherwise, it may cause the installation misplacement.
BW
2. Install the driver seat assembly
a. Install the driver seat assembly into the cab, and install EL
and tighten the rear seat mounting nuts.

Torque: 45~55N•m

b. Adjust the driver seat assembly to the formost position,

and install and tighten the mounting bolts in front of the
driver seat.
Torque: 45~55N•m

3. Adjust the seat (see “Chapter BW Body - Seats - Driver Seat, Adjustment”)

Warning
Adjust the seat to a proper position, shake the seat to confirm it is installed securely.

BW-167