Page 338 - Foton Workshop Manual - Auman EST-M
P. 338
DI - 284 Diagnosis - Diagnosis-fault diagnosis of electronic and electrical parts
5. Check the power circuit of reversing lamp switch.
a. Ignition switch: LOCK.
b. Disconnect the connector F015 of reverse lamp switch.
c. Ignition switch: ON, place the shift control rod at “reverse gear” position.
d. Measure the voltage between the reverse lamp switch
connector F015 terminal 1 and the ground with the
multimeter in voltage gear.
Standard voltage:
Multimeter connecting terminal Standard value
F015(2)- Grounding Storage battery voltage
Check if the result is ok?
Yes> retest the above steps.
No > repair or replace the open circuit wire harness from reversing lamp switch to frame fuse box.
DI-284
