Page 348 - Foton Workshop Manual - Auman EST-M

DI - 294 Diagnosis - Diagnosis-fault diagnosis of electronic and electrical parts

Procedure Inspection content Measure

Check the brake lamp. Yes Go to Step 10
● Ignition switch: ON.
9 Refer to the failure
● While stepping down the brake pedal, the brake lamp will be on. No
phenomenon list
Check if the result is ok?

Check the reversing lamp. Yes Go to Step 11
● Ignition switch: ON.
10 ● While moving the gearshift lever to "Reverse" position, the reversing Refer to the failure
No
lamp will be on. phenomenon list

Check if the result is ok?
Check the position lamp Yes Go to Step 12

● Ignition switch: ON.
11 ● While moving the lamplight switch to "Small lamp" position, the position Refer to the failure
No
lamp will be on. phenomenon list
Check if the result is ok?

Check the license plate lamp. Yes Go to Step 13
● Ignition switch: ON.
12 ● While moving the lamplight switch to "Small lamp" position, the license Refer to the failure
No
plate lamp will be on. phenomenon list
Check if the result is ok?

Check the room lamp. Yes End the basic inspection.
● Ignition switch: ON.
13 ● While opening the door or turning on the room lamp switch, the room Refer to the failure
No
lamp will be on. phenomenon list
Check if the result is ok?

DI-294