Page 1098 - Foton Workshop Manual - Aumark (BJ1099)

34-68 AXLE AND PROPELLER SHAFT - TRANSMISSION SHAFT ASSEMBLY

(d). Screw out the fixing bolt of the rear
propeller shaft middle bearing bracket.
NOTICE:
During this step, one mechanic is required to hold
the intermediate transmission shaft.

fuwx34191

(e). Unscrew the bolts connecting the rear
transmission shaft cardin joint and the rear
main reducer flange assembly.
NOTICE:
During this step, one mechanic is required to hold
the intermediate transmission shaft.

(f). Remove the rear transmission shaft assembly.

fuwx34096

4. Check the transmission shaft assembly
5. Check the cardin joint (Refer to "Chapter 34 Axle & Transmission Shaft - Cardin
Joint,Overhaul")
6. Check the middle bearing (refer to “Chapter 34 Axle and propeller shaft -
Servicing, middle bearing”).
7. Install the rear transmission shaft assembly
(a). Install the rear transmission shaft assembly as marked.
NOTICE:
Install them as marked. During this step, one mechanic is required to hold the intermediate
transmission shaft and the rear transmission shaft.

(b). Tighten the bolts connecting the rear
transmission shaft cardin joint and the rear
main reducer flange assembly.
Torque : 65~79N•m
NOTICE:
During this step, one mechanic is required to hold
the intermediate transmission shaft in suspension.

fuwx34096

Page 1098