Page 1125 - Foton Workshop Manual - Aumark (BJ1099)

AXLE AND PROPELLER SHAFT - REAR DIFFERENTIAL ASSEMBLY 34-95

8. Remove the driven gear
(a). Unscrew the retaining bolts of the driven
gear.

(b). Remove the driven gear.

9. Check the gear side slearance between
half axle gear and planetary gear
(a). Measure the gear side clearance between
the half axle gear and planetary gear with
a dial indicator.
Gear side clearance between half axle
gear and planetary gear:
If the clearance exceeds the limit, check
the end clearance of the half axle gear. 34
(Refer to "Chapter 34 Axle & Transmission
Shaft - Rear Differential Assembly,
Checking & Adjustment")
NOTICE
Hold the half axle gear and the planetary gear close to the differential housing, fix any of
the two gears and measure the central point of the other gear surface. Ensure the head of
the dial indicator is vertical to the measured gear surface. Measure all four gears at three
or more points on each gear.

Page 1125