Page 1152 - Foton Workshop Manual - Aumark (BJ1099)

35-4 BRAKE - BRAKE SYSTEM EMISSION

BRAKE SYSTEM EMISSION

DISCHARGE AIR
NOTICE:
Discharge air (brake system exhaust)Don't spill the brake fluid on the paint or your skin. If
that's the case, clean it immediately.
The normal discharge sequence: rear LH - rear RH - front RH - front LH.

1. Top up brake fluid
Brake fluid model : 7104–1

fuwx35001

2 . Air release of master cylinder
NOTICE:
•If the master cylinder has been removed or the
oil cup is emptied, the air in the master cylinder
shall be released.
•Use a vessel to receive the brake liquid
discharged to avoid contamination of the vehicle.
(a). Have one technician fully depress the
brake pedal for several times and then hold
the pedal depressed, and then loosen the
master cylinder brake oil pipe connector.
(b). Tighten the oil pipe connector as soon as
the brake liquid flows out, and loosen then
the brake pedal.
(c). Repeat (a) and (b) till the air in the master
cylinder is fully released.
(d). Clear the oil dirt on the brake oil pipe
connector.

Page 1152