Page 1157 - Foton Workshop Manual - Aumark (BJ1099)
P. 1157
BRAKE - BRAKE PEDAL 35-9
4. Adjust the free travel of the brake pedal
(a). Switch off all electrical units and ignition
and disconnect the negative battery cable.
(b). Disconnect the brake switch connector.
(c). Unscrew the locking nut of the brake switch
and rotate the nut, until the free travel meets the
required value.
(d). Tighten the locking nut of the brake switch.
Torque : 18±2mm
(e). Connect the brake switch connector.
(f). Connect battery negative cable.
35
Page 1157
