Page 2111 - Foton Workshop Manual - Aumark (BJ1099)
P. 2111
DIAGNOSIS-POWER WINDOW 62-59
(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)
Connect the pin by Standard value
multimeter 62
J04(11) - Grounding ＜ 2 Ω
Is the inspection result normal?
Yes>To step 5.
No >Repair or replace the harness.
5. Check harness and connector (Assistant driver door power window switch-BCM
control unit)
(a). Ignition switch:"LOCK".
(b). Unplug the assistant driver door power window switch G04.
(c). Disconnect the BCM control unit connector C57.
(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)
Connect the pin by Standard value
multimeter
G04(3) - C57(D9) ＜ 2 Ω
Is the inspection result normal?
Yes>To step 6.
No >Repair or replace the harness.
6. Check harness and connector (Assistant driver door power window switch-
grounding)
(a). Ignition switch:"LOCK".
(b). Unplug the assistant driver door power window switch G04.
(c). Disconnect the BCM control unit connector C57.
Page 2111
