Page 2115 - Foton Workshop Manual - Aumark (BJ1099)

DIAGNOSIS-POWER WINDOW 62-63

3. Check harness and connector (Assistant driver door power window motor-BCM
control unit)

(a). Ignition switch:"LOCK".
(b). Unplug the assistant driver door power window motor G01.
(c). Disconnect the BCM control unit connector C57. 62

(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter
G01(5) - C57(D32) ＜ 2 Ω

Is the inspection result normal?
Yes>To step4.
No >Repair or replace the communication harness between No.5 pin of assistant driver
door power window motor G01 and No. D32 of BCM control unit C57.

4. Check harness and connector (Assistant driver door power window motor-front
window fuse)

(a). Ignition switch:"LOCK".
(b). Unplug the assistant driver door power window motor G01.

(c). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter

G01(3) - F13 ＜ 2 Ω

Is the inspection result normal?
Yes>To step5.
No >Repair or replace the harness.

Page 2115