Page 2119 - Foton Workshop Manual - Aumark (BJ1099)

DIAGNOSIS-POWER WINDOW 62-67

(c). Measure the resistance with the multimeter.
Standard resistance: (check whether there
OFF
F28
is an open circuit)
F29
C55 F11
F35 R04 R03 F12
F34 R05
1 2 3 6 F33
F32 F13
7 8 9 10 11 12 F31 R13 F16 Connect the pin by
F27 R16 R12
F15 Standard value
F14 multimeter
F30 R15 62
R07
R14
R06
Ω F20 F19 F18 F17 F14(30A)- C55(B8) ＜ 2 Ω
fuwx62281
Is the inspection result normal?
Yes>To step 3.
No >Repair or replace the harness.
3. Check harness and connector (Driver door control switch assembly-BCM control unit)

(a). Ignition switch:"LOCK".
(b). Unplug the driver door control switch assembly J04.
(c). Disconnect the BCM control unit connector C57.

(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
OFF
C57 is an open circuit)
J04
16 15 14 13 12 11 10 9 8 7 6 5
Connect the pin by
32 31 30 28 27 25 24 23
8 6 Standard value
multimeter
16 15 14 13 11
Ω
J04(15)- C57(D10) ＜ 2 Ω
fuwx62282

Is the inspection result normal?
Yes>To step 4.
No >Repair or replace the harness.

4. Check Driver door control switch assembly

(a). Unplug the driver door control switch assembly J04.

Page 2119