Page 2130 - Foton Workshop Manual - Aumark (BJ1099)

62-78 DIAGNOSIS-POWER WINDOW

(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open.

Connect the pin by Standard value
multimeter
H01(1)-Grounding ＜ 2 Ω

Is the inspection result normal?
Yes>Replace Rear Right Door Power Window Switch.
No >Repair or replace the harness.

8. Check harness and connector (Right rear door power window motor-BCM control unit)

(a). Ignition switch:"LOCK".
(b). Unplug the right rear door power window motor H04.
(c). Disconnect the BCM control unit connector C55.

(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit))

Connect the pin by Standard value
multimeter

H04(2) - C55(B9)
＜ 2 Ω
H04(1) - C55(B10)

Is the inspection result normal?
Yes>Replace the right rear door power window motor.
No >Repair or replace the harness.

Page 2130