Page 2133 - Foton Workshop Manual - Aumark (BJ1099)

DIAGNOSIS-POWER WINDOW 62-81

(d). Measure the resistance with the multimeter.
Standard resistance: (check whether there
is an open circuit

Connect the pin by Standard value
multimeter 62
H04(5) - C57(D32) ＜ 2 Ω

Is the inspection result normal?
Yes>To step4.
No >Repair or replace the harness.

4. Check right rear door power window motor

(a). Ignition switch:"LOCK".
(b). Replace with a new right rear door power window motor, connect the vehicle
diagnostic device to the vehicle diagnose interface.
(c). Ignition switch:"ON"，read the DTC and observe the vehicle symptom with the
vehicle diagnostic device.

Check whether the fault code and symptom exist?
Yes>To step 5.
No >Replace the right rear door power window motor.

5. Check BCM control unit

(a). Ignition switch:"OFF".
(b). Replace a confirmed good BCM control unit, connect the vehicle diagnostic device
to the vehicle diagnose interface.
(c). Ignition switch:"ON"，read the DTC and observe the vehicle symptom with the
vehicle diagnostic device.

Check whether the fault code and symptom exist?
Yes>Find the causes from other symptoms.
No >Replace with a new BCM control unit.

Page 2133