Page 2343 - Foton Workshop Manual - Aumark (BJ1099)

DIAGNOSIS-LIGHTING SYSTEM 62-291

Procedures Inspection contents Action

Check the hazard warning lamp Yes To step9
•The hazard warning lamp is bright Refer to“Chapter 62 Diagnosis -
8
after pressing its switch. No Lighting System, Fault Symptom
Is the result normal? Table” 62

Check the brake lamp Yes To step10
•Ignition switch:"ON".
9 •The brake lamp is bright after Refer to“Chapter 62 Diagnosis -
pressing the brake pedal. No Lighting System, Fault Symptom
Is the result normal? Table”

Check the back-up lamp Yes To step11
•Ignition switch:"ON".
•The reversing light is bright after Refer to“Chapter 62 Diagnosis -
10
turning the shift lever to reverse No Lighting System, Fault Symptom
gear. Table”
Is the result normal?
Check the position lamp Yes To step12
•Ignition switch:"ON".
•Turn the position lamp switch to
the "dim lamp", "bright lamp"
11 gear, or turn the combination Refer to“Chapter 62 Diagnosis -
lamp switch to "low beam lamp", No Lighting System, Fault Symptom
"high beam lamp" gear, the Table”
position lamp is bright.
Is the result normal?

Check the daytime running lamp Yes To step13
•Ignition switch:"ON".
12 •The daytime running lamp is on Refer to“Chapter 62 Diagnosis -
when the car is driving. No Lighting System, Fault Symptom
Is the result normal? Table”

Check the interior room lamp Yes To step14
•Ignition switch:"ON".
•The interior room lamp is bright
13 Refer to“Chapter 62 Diagnosis -
when opening the door or turn on No Lighting System, Fault Symptom
the interior room switch. Table”
Is the result normal?

Page 2343