Page 2380 - Foton Workshop Manual - Aumark (BJ1099)

62-328 DIAGNOSIS-LIGHTING SYSTEM

(d). Measure the resistance between the
combination switch connector C16 and the
OFF T.S
Ω grounding with a multimeter.

Connect the pin by
C16 multimeter Specified value
10 9 8 7 6 5 4 3 2 1 C16(20) - Grounding Infinite
20 19 18 17 16 15 14 13 12 11

fuwx62 896
Is the inspection result normal?
Yes>To step 5.
No >Repair or replace the harness of the short circuit to ground between C58 and the
combination switch C16.

5. Check the high beam lamp relay

(a). Ignition switch:"LOCK".
(b). Pull out the high beam lamp relay R6.

(c). Check the high beam lamp relay R6.

Connect
Condition the pin by Specified
value
multimeter
Apply the power
supply voltage
between the 3-5 Existed
No.1 and No.2
pin

Ordinary state 1-2 <2Ω
Is the inspection result normal?
Yes>Find the causes from other symptoms.
No >Replace the high beam lamp relay.

Page 2380