Page 2383 - Foton Workshop Manual - Aumark (BJ1099)

DIAGNOSIS-LIGHTING SYSTEM 62-331

(c). Measure the resistance between No. 1
terminal of the left front fog lamp connector
A34 and No. 5 terminal of the front fog
lamp relay with a multimeter.
Standard resistance: (check whether there
is an open circuit) 62

Connect the pin by Standard value
multimeter
A34(1) - R07(5) ≤ 2 Ω

Is the inspection result normal?
Yes>To step 3.
No >Repair the harness disconnection between the left front fog lamp connector A34 and
the front fog lamp relay R07.

3. Check the harness and the connector (left front fog lamp-grounding)

(a). Ignition switch:"LOCK".
(b). Disconnect the left front combination lamp connector A34.

(c). Measure the resistance between No. 2
terminal of the left front combination lamp
connector A34 and the grounding with a
multimeter.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter

A34(2) - Grounding ≤ 2 Ω

Is the inspection result normal?
Yes>Find the causes from other symptoms.
No >Repair or replace the harness between the left front fog lamp connector A34 and the
grounding.

Page 2383