Page 2387 - Foton Workshop Manual - Aumark (BJ1099)

DIAGNOSIS-LIGHTING SYSTEM 62-335

(c). Measure the resistance according to values
in the table below.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value 62
multimeter
R07(2) - C57(D16) ≤ 2 Ω

Is the inspection result normal?
Yes>To step 5.
No >Repair or replace the harness.

5. Check the harness and the connector (left front fog lamp relay-fog lamp)

(a). Ignition switch:"LOCK".
(b). Disconnect the front fog lamp relay R07.
(c). Disconnect the left front combination lamp connector A34.
(d). Disconnect the right front combination lamp connector A05.

(e). Measure the resistance according to values
in the table below.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter

R07(5) - A34(1) ≤ 2 Ω
R07(5) - A05(1) ≤ 2 Ω

Is the inspection result normal?
Yes>To step 6.
No >Repair or replace the harness.

6. Check the harness and the connector (front fog lamp relay-front fog lamp fuse)

(a). Ignition switch:"LOCK".
(b). Disconnect the front fog lamp connector R07.

Page 2387