Page 2388 - Foton Workshop Manual - Aumark (BJ1099)

62-336 DIAGNOSIS-LIGHTING SYSTEM

(c). Measure the resistance according to values
Ω in the table below.
OFF T.S
Standard resistance: (check whether there
R10 F21 F23
R09 F22 F24 is an open circuit)
F36 F25 R01 R02
R11 F37 F26
F02 F01 F04 F03 F05 F06 F07 F08 F09 F10 3
F28 5 R7 Connect the pin by
R05 R12 R15 F18 Standard value
multimeter
F11 F12 F13 F16 F15 F14 F30 1 4 2
F29 F17
F18
F19
R03 R13 R07 F18 - R07(1) ＜ 2Ω
F20
fuwx62 892
F18 - R07(3) ＜ 2Ω
Is the result normal?
Yes>To step 7.
No >Repair or replace the harness.

7. Check the harness and the connectors (BCM control unit-combination switch)

(a). Ignition switch:"LOCK".
(b). Disconnect the combination switch connector C16.
(c). Disconnect the BCM control unit connector C58.

(d). Measure the resistance according to values
in the table below.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter
C16(8) - C58(E9) ＜ 2Ω

Is the result normal?
Yes>To step 8.
No >Repair or replace the harness.

8. Check the combination switch

(a). Ignition switch:"LOCK".
(b). Disconnect the combination switch connector C16.

Page 2388