Page 2443 - Foton Workshop Manual - Aumark (BJ1099)

DIAGNOSIS-LIGHTING SYSTEM 62-391

(e). Use a multimeter to measure the resistance
between No. 2 pin of the left daytime
running light connector A44 and No. 2 pin
of A43 and the ground.
Standard resistance: (check whether there
is an open circuit) 62

Connect the pin by Standard value
multimeter
A44(2) - Grounding ≤ 2 Ω

Is the inspection result normal?
Yes>To step 4.
No >Repair or replace harness.

4. Check harness short circuit to the grounding

(a). Disconnect body controller C56, left daytime running light connector A44, right
daytime running light connector A43.

(b). Use a multimeter to measure the resistance
between No. 5 terminal of body controller
OFF T.S
Ω C56 and the ground.
Standard resistance: (check whether there
is a short circuit)

C56
Connect the pin by
1 2 3 4 5
multimeter
6 7 8 10 1112 Standard value
fuwx62 868
C56(5) - Grounding ＞ 1 MΩ

(c). Use a multimeter to measure the resistance
between No. 1 terminal of the left daytime
running light connector A44 and the
ground.
Standard resistance: (check whether there
is a short circuit)

Connect the pin by Standard value
multimeter

A44(1) - Grounding ＞ 1 MΩ

Page 2443