Page 2453 - Foton Workshop Manual - Aumark (BJ1099)

DIAGNOSIS-LIGHTING SYSTEM 62-401

3. Check the harness disconnection

(a). Disconnect front interior assembly connector F01.

(b). Use a multimeter to measure the resistance
between No. 1 terminal of connector F01 62
and No. 12 terminal of connector C56.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter
F01(1) - C56(12) ≤ 2 Ω

(c). Use a multimeter to measure the resistance
between No. 2 terminal of connector F01
and the grounding.
Standard resistance: (check whether there
is an open circuit)

Connect the pin by Standard value
multimeter

F01(2) - Grounding ≤ 2 Ω

Is the result normal?
Yes>Find the causes from other symptoms.
No >Repair or replace the harness.

Page 2453