Page 2492 - Foton Workshop Manual - Sauvana

62-440 DIAGNOSIS-COMBINATION METER

(c). Use a multimeter to measure the voltage
between No. 2 terminal of fuel sensor
OFF T.S
Ω connector B01 and No. 14 terminal of
combination meter connector C23, and
the voltage between No. 3 terminal of B01
C23
B01
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 and No. 13 terminal of combination meter
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
1 2 3 4 connector C23.
Standard voltage:
fuwx62928
Connect the pin by Standard value
multimeter

B01 (1) - C23 (14) ≤ 2Ω
B01 (2) - C23 (13) ≤ 2Ω
Is the result normal?
Yes>To step 4.
No >Repair the open circuit fault between combination meter connector C23 and fuel
sensor connector B01.

4. Replacement inspection

(a). Replace the same combination meter, verify whether the fault is eliminated.

Is the result normal?
Yes>Replace the corresponding combination meter.
No >Remove fault from other symptoms.

Page 2492