Page 2496 - Foton Workshop Manual - Sauvana
P. 2496
62-444 DIAGNOSIS-COMBINATION METER
4. Check the open circuit of driver side safety belt indicator lamp signal circuit
(a). Measure the voltage between No.6 pin of
combination meter connector C23 and the
grounding by multimeter.
Standard voltage:
Connect the pin by Standard value
multimeter
C23 (6) - Grounding Battery volt
Is the inspection result normal?
Yes>Repair the open circuit of signal circuit between No.1 pin of driver side safety belt
warning switch D07 connector and No.6 pin of combination meter C23 connector
temperature signal line is opened.
No >Replace combination meter assembly.
Page 2496
