Page 1872 - Foton Workshop Manual - Tunland (AT)

41-20 TRANSMISSION（6HP21） - OIL PAN AND FILTER ELEMENT

7 . Put a new filter element at the mounting
position.
NOTICE

Pay attention to the seal ring during installation.

8 . Refit the oil pan.
(a) Refit the oil pan gasket onto the oil pan.

NOTICE

• To fit the gasket, find out the raised part
of the gasket, and align it with the oil pan
vent hole.
• If the oil pan is not replaced, the sealing
contact surface shall be clean and free
from oil (the corrosive cleanser shall not
be used), and the use of sealant is not
allowed.

(b) Refit the oil pan, and tighten the bolt in the
sequence shown in the left figure.
Torque:12N•m

41

9 . Fill transmission lubricating oil and tighten
the filer plug.
Torque:35 N•m

Transmission lubricating oil (model): ATF
M-1375.4

Page 1872