Page 1869 - Foton Workshop Manual - Tunland (AT)
P. 1869

TRANSMISSION(6HP21) - TRANSMISSION ASSEMBLY                          41-17

                                                           (s)    Reconnect the gearshift flexible shaft onto the
                                                                  transmission.

















                                                           (t)    Tighten the connecting bolt between the rear
                                                                  propeller shaft universal joint and the
                                                                  transmission flange plate assembly.
                                                                  Torque: 65~79N•m













                 8 .    Refit the transfer case assembly (refer to “Chapter 41 Transmission(6HP21) -
                        Replacement, transfer case (4WD)).

                                                           9 .    Fill transmission lubricating oil and tighten
                                                                  the filer plug.
                                                                  Torque:35 N•m

                                                                  Transmission lubricating oil (model): ATF
                                                                  M-1375.4
                                                                                                                     41
                                                                NOTICE

                                                           •      Transmission lubricating oil products of
                                                                  different grades shall not be mixed.
                                                 ftwx411031
                                                           •      When check the oil level, do park the
                                                                  vehicle on a level ground.


                 10 .   Lower the vehicle.
                 11 .   Refit the battery negative cable (refer to “Chapter 20 Starting and charging -
                        Replacement, battery”).
                 12 .   Transmission running-in specification and test

                 (a)    Check whether the gearshifting operation is flexible and whether the gear is fully
                        engaged.
                 (b)    When testing the transmission, there shall be no abnormal friction sound or impact
                        sound.






                                                                                                        Page 1869
   1864   1865   1866   1867   1868   1869   1870   1871   1872   1873   1874